An Ashmore homeowner had put up with a large glass sliding door for months. It dragged on the track, took real effort to open and close, and was starting to look like it might do some damage.
The rollers were badly worn. I lifted the door out, replaced the roller assemblies, and cleaned and serviced the track to clear years of dirt and debris. Then I adjusted the door so it sat square and ran smoothly.
Back in place, the door slid with a light push and closed without sticking. A final adjustment made sure the lock caught properly and the door sealed as it should. The homeowner said it felt better than it had in years.
How I fix a heavy sliding door that drags
- Lift the panel out safely, as big glass doors are heavy.
- Replace the worn roller assemblies with the right size and type.
- Clean the track and check it for dents or wear.
- Adjust the roller height so the door runs level.
- Line the lock up with the striker and test the seal.
Need something similar done in Ashmore? I’m Dan, a licensed tradesman and former builder with 35+ years in the building industry, and I do every job myself. See my handyman services in Ashmore, or get a free quote. You can also call Sue on 0435 207 771.
