Living this close to the beach is great, but salt air is hard on sliding flyscreen doors. At this Currumbin home, two of them had become a real struggle to open, with corroded frames and rollers that had given up.
I lifted both doors out, cleaned the salt and grit out of the frames, roller housings and tracks, and fitted eight new heavy-duty stainless-steel wheels, which hold up far better in coastal air. I moved the end stops so each door stops where it should, and treated the rollers and locks with a marine-grade lubricant.
Back on their tracks, both doors were height-adjusted and tested: smooth to slide, sealing properly and locking as they should.
How I fix a sticky sliding flyscreen door
- Lift the door out and check the rollers, frame corners and lock.
- Clean the track and roller housings of sand, salt and grit.
- Replace worn rollers (stainless steel near the coast).
- Adjust the height so the door runs level and meets the lock.
- Lubricate and test the slide, seal and lock before I leave.
Need something similar done in Currumbin? I’m Dan, a licensed tradesman and former builder with 35+ years in the building industry, and I do every job myself. See my handyman services in Currumbin, or get a free quote. You can also call Sue on 0435 207 771.
